Short Motors suitable for Ford and Perkins from Vapormatic Vapormatic Short Motors are manufactured to the highest standards and use all new Vapormatic parts

Short Motors by Vapormatic

Short Motors suitable for Ford and Perkins from Vapormatic
Manufacturing of the Short Motor program from Vapormatic
Main page for Short Motors suitable for Perkins and Ford

Vapormatic Short Motors are manufactured to the highest standards and use all new Vapormatic parts. When installing a Vapormatic Short Motor you can be confident that your rebuild will come in on time, on budget and add value to your tractor.

  • Blocks and components machined to Vapormatic's specification
  • Professionally built in the UK by trained engineers
  • Full 12 months parts and labour warranty
  • Reduced downtime of your tractor
  • Available at your stockist next day*

What's included?
All blocks are supplied fully assembled including:

  • Block
  • Crankshaft
  • Con rods and bearings
  • Pistons and rings
  • Liners (Perkins only)
  • Camshaft

*Next day delivery is subject to availability and delivery charges. Please see your Stockist for more information...

In any rebuild it is important to ensure that all engine auxiliary parts are in good working condition. It is recommended that checks and replacements are made where necessary on parts such as, water pumps, thermostats, clutches, silencers, injector nozzles, fan belts, filters and radiator hoses.

Visit www.vapormatic.com to find the parts you need.

Quality short motors for 3 Cylinder Perkins
Manufacturing of the Short Motor program from Vapormatic

Quality Short Motors

Perkins 3 Cylinder

Short Motors suitable for: Perkins A3.152

Rope seal replacement suitable for: Massey Ferguson 35, 35X
Part no. VPB8017

Short Motors suitable for: Perkins AD3.152

Rope seal replacement suitable for: Massey Ferguson135
Part no. VPB8018

Short Motors suitable for: Perkins A3.152

Lip seal replacement 5 Ring piston replacement suitable for:
Massey Ferguson 135, 230, 240, 250, 340
Part no. VPB8019

Short Motors suitable for: Perkins A3.152

Lip seal replacement 4 Ring piston replacement suitable for:
Massey Ferguson 148, 350, 550
Part no. VPB8020

For a complete list of supporting parts available for these short motors, please visit: www.vapormatic.com

Quality short motors for 4 Cylinder Perkins
Quality short motors for 3 Cylinder Perkins

Quality Short Motors

Perkins 4 Cylinder

Short Motors suitable for: Perkins A4.236

Rope seal replacement suitable for: Massey Ferguson 168, 175
plus many more industrial and agricultural applications.
Part no. VPB8027

Short Motors suitable for: Perkins A4.248

Rope seal replacement suitable for: Massey Ferguson 178,185,188
plus many more industrial and agricultural applications
VPB8028

Short Motors suitable for: Perkins A4.236

Lip seal replacement suitable for: Massey Ferguson 168, 175, 265, 275,
565, 575, 675, 365, 375

plus many more industrial and agricultural applications
Part no. VPB8029

Short Motors suitable for: Perkins A4.248

Lip seal replacement suitable for: Massey Ferguson 178, 185, 188, 285, 290, 590, 690, 390 plus many more industrial and agricultural applications
Part no. VPB8030

Note: When installing these short motors the following products are also needed:
Top gasket set Part no. VPA4006 (without fire ring liners), Bottom gasket set Part no. VPC6007, Cylinder head bolt kit Part no. VPA3920 (if it is a replacement for a MF 300 series or later tractor, then you will not need this kit)

Quality short motors for Ford 4 Cylinder Engine
Wireless CabCAM cameras and accessories

Quality Short Motors

Ford 3 Cylinder

Short Motors suitable for: FORD BSD333 - Normally Aspirated

Direct replacement for: BSD333: 4000, 4600, 4610, 4630

Also suitable replacement for: 2000, 3000, 2600, 3600, 3055, 3900, 4100, 2310, 2610, 2810, 2910, 3610, 3910, 4110
Part no. VPB8024

Earlier specification engines with 1/2" UNC thread cylinder head bolts will also require VPA3919 cylinder head bolt kit, VPA5083 timing cover kit bolt kit, VPA5080 timing hub bolt, VPA5081 timing hub and VPC5440 rear main seal housing to complete installation of the New Short Motor.

For a complete list of supporting parts available for these short motors, please visit: www.vapormatic.com

Short Motor Program Extension
Wireless CabCAM cameras and accessories

Quality Short Motors

Ford 4 Cylinder

Short Motors suitable for: Ford BSD444 - Normally Aspirated

4 Cylinder, 111mm bore x 111mm stroke Suitable for: Ford 6410, 6600, 6610, 6700
Part no. VPB8025

Short Motors suitable for: Ford BSD444T - Turbo version

4 Cylinder, 111mm bore x 111mm stroke Suitable for: Ford 6810, 7600, 7610 7710

Also suitable replacement for: BSD442T Suitable for: Ford 7600, 7700
Part no. VPB8026

Note: When installing these short motors the following products are also needed: Oil pump Part no. VPD1100, Oil pump driveshaft Part no. VPD1502 Top gasket set Head gasket Part no. VPA4103, Head gasket Part no. VPA4303, Bottom gasket set Part no. VPC6106. For a complete list of supporting parts available for these short motors, please visit: www.vapormatic.com

Short Motor Program Extension
Quality short motors for Ford 4 Cylinder Engine

This extension to the Short Motor Programme has been 3 years in development and represents a unique opportunity for Vapormatic customers.

The all new block is manufactured exclusively for Vapormatic, using the very
latest "lost-foam" casting technique. 21st century foundry processes and the
metallurgical specification deliver a high degree of accuracy and an excellent
surface finish, both internally and externally.

The latest CNC machining and coordinate inspection has enabled ISO9000
repeatable dimensional, geometric and positional control. The Short Motors
are built in Exeter, U.K. by our engineers who ensure all critical measurements
are checked at every stage of the build process.

Vapormatic Short Motors only use new parts and are fully supported by our 12 months parts and labour warranty.

For a complete list of supporting parts available for these short motors, please visit: www.vapormatic.com

Short Motor Program Extension
Quality short motors for Ford 4 Cylinder Engine

Attention to detail...

Camshaft Rotation Check

Camshaft followers inserted and checked to ensure free movement
within machined housing
Camshaft installed and free rotation checked
Oil pump drive gear mounted and backlash checked

Crankshaft Assembly and Checks

Care taken to ensure oil transfer holes are aligned - bearings to block
Crankshaft installed and free rotation checked
Final torque sequence carried out using calibrated equipment
Crankshaft end float checked to ensure it is within tolerances

Piston Skirt to Bore Clearance Check

Measurement checked from the bore to the side of the thrust face of
each piston
Checks carried out in multiple places within the bore
Reduces oil consumption and noise

Piston Ring Gap Measurement

Piston rings checked to ensure they are within tolerance
Checks made in multiple places within the bore
Aids compression, fast starting and reduced emissions

Short Motor Program Extension
Quality short motors for Ford 4 Cylinder Engine

Attention to detail...

Pistons, Rings Connecting Rods

Piston and connecting rod assembly checked to ensure free rotation
of the piston pin
Piston rings checked and staggered around piston to avoid excess oil
consumption, aid compression and reduce blow-by

Compression Height Check

Piston protrusion is checked to ensure the correct compression height is achieved
Maximised compression and aid starting

Final Checks

All torque settings are checked
Final rotation ensure no tight spots are experienced
Final visual inspection carried out
Rust inhibitor applied to all surfaces

Packaging

Sealed in a plastic bag with silica gel absorbent pack
Secure tri-wall box to eliminate movement in transport